od manalana
stř 23. pro 2020 23:42:26
stř 23. pro 2020 23:42:26
Jak odstranit Auroru? (ale bez fixace budoucích chyb ve starém softu)
resp. co lze dělat, když PC je low-end?
měl jsem problém s CPU a toto mi poradili
zatím jsem nezkoušel, protože přepnul jsem na "Carbon" (table theme) - jednodušší grafika
např. "Mercury" mi žere 30% CPU za každý stůl, tzn. 3 stoly a 100% CPU usage
Carbon jen 65% (20% za každý stůl) a funguji
pozn: když mají Carbon, tak si musí být vědomi, že Aurora moc žere výkon PC
-------------------------------------------------------------------------
If the issue remains after the graphic drivers updates, this indicates that you are using low-end hardware. For these situations, as a last resort, to deactivate Aurora, follow the steps below:
Important:
By deactivating Aurora, you'll be using our old graphics engine which we no longer support. You take this action at your own risk. We will not fix bugs or address issues experienced while using the old graphics engine.
The first step is to open the settings folder. If you can open our software and navigate through the menus, follow these steps:
From the lobby, select 'Help', then 'Open My Settings Folder'. You'll see the folder open.
Close our software (keeping the settings folder open).
If you cannot open our software or it crashes during these steps, there is another way to open the settings folder:
Press the 'Windows Key' + 'R' (at the same time).
Type the following or copy/paste into the area provided and press 'Enter':
%USERPROFILE%\AppData\Local
Locate and open our software's folder.
The second step is to edit the settings file:
In the settings folder, find the 'user' or 'user.ini' file, right-click on it and select 'Edit' to open the file with notepad.
Within the file, find the section that starts with [PipeOption] and add the following line "LegacyPokerTable=1".
Save the changes you made to the settings file and restart your computer.
Reopen our software, then log back in.
===================
jak ulevit CPU při Auroře?
původně jsem to řešil tak, že ve stejném souboru user.ini
jsem ulehčil procesoru přesměrováním výkonu na grafickou kartu, pomohlo to CPU, ale bohužel to bylo ještě horší řešení, grafická karta mi kolabovala a klient spadl = sit out, login a mezitím např. blinded out v HU
nutno změnit nastavení u položky níže (je skoro na konci souboru) na číslo 4 (the graphic card is relieving processor from graphic rendering)
[OpenGl]
openGlSetting=4
(původně tam byla 1, příp. jsem našel, že tam lidi měli 100)
mě tedy nepomohlo, musel jsem to vrátit jsem to na 1, příp. samo se to vrátilo, když jsem při kolapsu zmáčkl ano (něco, že rendering graphic)
resp. co lze dělat, když PC je low-end?
měl jsem problém s CPU a toto mi poradili
zatím jsem nezkoušel, protože přepnul jsem na "Carbon" (table theme) - jednodušší grafika
např. "Mercury" mi žere 30% CPU za každý stůl, tzn. 3 stoly a 100% CPU usage
Carbon jen 65% (20% za každý stůl) a funguji
pozn: když mají Carbon, tak si musí být vědomi, že Aurora moc žere výkon PC
-------------------------------------------------------------------------
If the issue remains after the graphic drivers updates, this indicates that you are using low-end hardware. For these situations, as a last resort, to deactivate Aurora, follow the steps below:
Important:
By deactivating Aurora, you'll be using our old graphics engine which we no longer support. You take this action at your own risk. We will not fix bugs or address issues experienced while using the old graphics engine.
The first step is to open the settings folder. If you can open our software and navigate through the menus, follow these steps:
From the lobby, select 'Help', then 'Open My Settings Folder'. You'll see the folder open.
Close our software (keeping the settings folder open).
If you cannot open our software or it crashes during these steps, there is another way to open the settings folder:
Press the 'Windows Key' + 'R' (at the same time).
Type the following or copy/paste into the area provided and press 'Enter':
%USERPROFILE%\AppData\Local
Locate and open our software's folder.
The second step is to edit the settings file:
In the settings folder, find the 'user' or 'user.ini' file, right-click on it and select 'Edit' to open the file with notepad.
Within the file, find the section that starts with [PipeOption] and add the following line "LegacyPokerTable=1".
Save the changes you made to the settings file and restart your computer.
Reopen our software, then log back in.
===================
jak ulevit CPU při Auroře?
původně jsem to řešil tak, že ve stejném souboru user.ini
jsem ulehčil procesoru přesměrováním výkonu na grafickou kartu, pomohlo to CPU, ale bohužel to bylo ještě horší řešení, grafická karta mi kolabovala a klient spadl = sit out, login a mezitím např. blinded out v HU
nutno změnit nastavení u položky níže (je skoro na konci souboru) na číslo 4 (the graphic card is relieving processor from graphic rendering)
[OpenGl]
openGlSetting=4
(původně tam byla 1, příp. jsem našel, že tam lidi měli 100)
mě tedy nepomohlo, musel jsem to vrátit jsem to na 1, příp. samo se to vrátilo, když jsem při kolapsu zmáčkl ano (něco, že rendering graphic)